Description
The SCSI Emulator allows CF Cards up to 16GB to attach to the SCSI bus. It will be It will be seen as a SCSI Magneto Optic drive or SCSI MO Emulation for a Fujitsu drive by the host computer The SCSI MO emulator can operate with many other Magneto Optic Drives and can be programmed to suit the host systems requirement.
CF card is seen as a SCSI Magneto Optic Drive to the Host
Compact Flash card, which will be seen as a regular SCSI Magneto Optic device on the Host’s SCSI bus 
Board size: 3.5” Form factor – 3.75”x5.5”.
Compact Flash: Standard 3M header for Type 1 & 2 cards, Push button Ejector to remove CF
Power: 5 Volts only @ 0.8 Watt (Typical) + CF requirement
Power connector: Standard Disk drive type SCSI-1 and 2 Compatible. 50 pin DIL 0.1” Connector
SCSI transfer rate: 10Mbytes/second
LCD Display: (optional) 2X16 backlit display with push button (mounted externally) for SCSI set-up , real time activity display and real-time diagnostics
Programmable to Emulate any other Magneto Optic Drives
RS232 Serial Port for microcode load and real time diagnostics.
Key Search Term:
Magneto Optic SCSI Emulator; Magneto Optic SCSI Emulation: Fujitsu Magneto Optic emulator; MO SCSI emulation; MO SCSI emulator; SCSI MO emulator; SCSI MO emulation; Fujitsu MCE3064SS emulation; IOMEGA ZIP SCSI emulator; IOMEGA JAZ replacement; Maxoptix T6-5200 SCSI Emulator; Ricoh RO-5030E Emulation; Sony SMO C301; Teac FC-1 SCSI emulation to CF,NEAX 61K (CGMTU),NEAX 61E (Alta e Baixa velocidade), NEAX 61M, NEAX Sigma, Alcatel E10, Alcatel S12, Ericsson AXE10, Siemens EWSD, Tropico PHT 1230, Fujitsu MCR3230SS, Fujitsu MCR3064SS, Fujitsu MCM3130SS-S, Fujitsu M2512A, SONY SMO-C301-04E, SONY SMO-F551, Ricoh RO-5030EII, MOS520E, SONY SMO-F541, SCSI BRIDGE, SCSIBRIDGE, BRIDGE SCSI, BRIDGESCSI, CF SCSI BRIDGE