• Small format PCB converts Compact Flash Media to appear as a Sony Magneto Optic Emulator on a Host’s SCSI bus
• 3.5” form factor PCB which will replace any 3.5” or 5 ¼” Sony Magneto Optic Emulator
• Will fit in a 3.5” disk slot using the same mountings
• SCSI Host will typically see the device as a Sony Magneto Optic Emulator of any emulation
• Board is low power, using 5V only, and has an optional add-on display and pushbutton user interface
• Microcode is field upgradable via integral serial port
• Optional integration support available if required

Board size: 3.5” Form factor – 3.75”x5.5”.

Compact Flash: Standard 3M header for Type 1 & 2 cards, Push button Ejector to remove CF

Power: 5 Volts only @ 0.8 Watt (Typical) + CF requirement

Power connector: Standard Disk drive type SCSI-1 and 2 Compatible. 50 pin DIL 0.1” Connector

SCSI transfer rate: 10Mbytes/second

LCD Display: (optional) 2X16 backlit display with push button (mounted externally) for SCSI set-up , real time activity display and real-time diagnostics

Programmable to Emulate any other Sony Magneto Optic Emulators

RS232 Serial Port for microcode load and real time diagnostics.